Electronics

SnapSil

Momentive RTV108

1K acetoxy RTV silicone, moisture cure

One-component acetoxy RTV silicone from the RTV100 series, translucent, paste. Primerless adhesion to metals, glass, ceramics, silicone rubber and some rigid plastics; primers SS4004/SS4044/SS4179 for difficult substrates.

SnapSil

Momentive RTV109

1K acetoxy RTV silicone, moisture cure

One-component acetoxy RTV silicone from the RTV100 series, aluminium, paste. Primerless adhesion to metals, glass, ceramics, silicone rubber and some rigid plastics; primers SS4004/SS4044/SS4179 for difficult substrates.

SnapSil

Momentive RTV112

1K acetoxy RTV silicone, moisture cure

One-component acetoxy RTV silicone from the RTV100 series, white, self-levelling (200 P). Primerless adhesion to metals, glass, ceramics, silicone rubber and some rigid plastics; primers SS4004/SS4044/SS4179 for difficult substrates.

SnapSil

Momentive RTV116

1K acetoxy RTV silicone, moisture cure

One-component acetoxy RTV silicone from the RTV100 series, red, high-temperature self-levelling (250 P). Primerless adhesion to metals, glass, ceramics, silicone rubber and some rigid plastics; primers SS4004/SS4044/SS4179 for difficult substrates.

SnapSil

Momentive RTV118

1K acetoxy RTV silicone, moisture cure

One-component acetoxy RTV silicone from the RTV100 series, translucent, self-levelling (200 P). Primerless adhesion to metals, glass, ceramics, silicone rubber and some rigid plastics; primers SS4004/SS4044/SS4179 for difficult substrates.

SnapSil

Momentive RTV142

1K alkoxy (neutral) RTV silicone, low volatility

White, non-corrosive, low-outgassing paste adhesive-sealant for electronics joints on vertical/overhead surfaces. Neutral cure releasing methanol; primers SS4004P/SS4044P/SS4179 on difficult substrates.

Momentive

Momentive RTV160

1K alkoxy (neutral) RTV silicone, electronic grade

White fluid neutral-cure silicone sealant, non-corrosive on copper/brass, for insulating and protecting PCBs and connections. Primers SS4004/SS4044/SS4179 on difficult substrates.

SilTrust

Momentive RTV8262

2K condensation RTV silicone, high temperature

Red two-component silicone for potting modules, connectors and coils at high temperature.

Novasil

Novasil S 49

2K alkoxy condensation silicone

Industrial two-component adhesive-sealant with primerless adhesion even in the presence of water, for photovoltaics, electronics and home appliances.

Novasil

Novasil S 800

1K neutral alkoxy silicone

Clear 1K silicone with good adhesion to glass and plastics and resistance to temperature and UV.

Momentive

Momentive ECC4865

Silicone (type not documented in TDS)

Reference for which only a Spanish SDS exists; its use is not documented in a TDS.

Kömmerling

Körapop 257

1K silane-terminated polymer (MS/STP), solvent-free, moisture cure

Plasticiser-free MS with high cold and heat resistance; proposed for PC↔metal with HG 83 and on plasticised substrates.

Kömmerling

Körapop 240

1K silane-terminated polymer (MS/STP), solvent-free, moisture cure

Elastic adhesive-sealant with high mechanical performance and great weather resistance.

Novasil

Novasil S 804

1K neutral alkoxy silicone, self-levelling

Fluid high-temperature neutral silicone filling compound for bonding and sealing in home appliances.

Vitralit

Vitralit UC 1870

1K epoxy, UV/VIS cure

Adhesive for active alignment and optoelectronics with low outgassing, low shrinkage and low CTE.

Vitralit

Vitralit UD 8057

UV/VIS + moisture cure

Adhesive for flexible electronics with high adhesion to various substrates, UV fixing and moisture post-cure in shadow areas.

Structalit

Structalit 8801

1K epoxy, heat cure

Beige one-component epoxy with short low-temperature cure for structural bonding, magnets, glob top and sensor potting; highly resistant to oils, greases and media, low outgassing and low ionic content; ISO 10993-5.

Structalit

Structalit 5894 M

1K epoxy, heat cure

Black fill material for PCB encapsulation (e.g. level sensors) and frame & fill, with very high chemical, thermal and shock resistance.

Structalit

Structalit 3060-1

1K epoxy, heat cure

Very flexible, very fast-curing one-component epoxy for fixing and protecting SMD components, flexible electronics, wafer level bonding, encapsulation and lens bonding.

Structalit

Structalit 5604

1K epoxy, heat cure

Fast-curing red SMD adhesive, resistant to soldering temperatures, for protecting and fixing components.

Structalit

Structalit 5606 F

Epoxy, heat cure, fluorescent

Fast, low-temperature curing SMD adhesive, easy to dispense, screen-printable and suitable for pin transfer.

Structalit

Structalit 5704

1K epoxy, heat cure

Stable high-Tg black epoxy as the frame in frame & fill with the Structalit 5717/5719/5720 fills and for edge bonding; no bleeding and very low ionic content, suitable for semiconductors.

Structalit

Structalit 5810-1

2K epoxy, heat/room-temperature cure

Clear low-viscosity two-component epoxy for PCB potting, resistant to moisture and chemicals.

Structalit

Structalit 8838 T

Epoxy, heat cure

Highly flexible, stress-compensating, low-outgassing epoxy for LBA and lens bonding in automotive optical sensors.

MG Chemicals

MG Chemicals 832HD

Rigid 2K potting epoxy

General-purpose epoxy encapsulant that cures rigid; used to give IP68 to junction boxes of flowmeters and submersible sensors.

MG Chemicals

MG Chemicals 832TC

2K thermally conductive potting epoxy

Thermally conductive (non-flame-retardant) potting epoxy for LED drivers and strips and battery modules.

MG Chemicals

MG Chemicals 834B

2K thermally conductive flame-retardant potting epoxy

Rigid, thermally conductive, flame-retardant epoxy encapsulant (non-halogenated fillers) for batteries, LED drivers and electronics with fire risk.

MG Chemicals

MG Chemicals 834HTC

2K thermally conductive flame-retardant potting epoxy

Rigid thermally conductive, flame-retardant epoxy encapsulant, UL94 V-0 certified, for LED drivers and battery packs.

Momentive

Momentive RTV60

RTV potting silicone

Low-modulus RTV potting silicone, suitable for delicate SMD components and a wide temperature range (family data).

Momentive

Momentive RTV88

RTV potting silicone

Low-modulus RTV potting silicone, suitable for delicate SMD components and a wide temperature range (family data).

Momentive

Momentive RTV133

1K alkoxy (neutral) RTV silicone, moisture cure

Black, thixotropic, low-flammability silicone sealant-adhesive for electronics, aerospace and equipment. Neutral cure releasing alcohol; primers SS4004/SS4044/SS4179 for difficult substrates.

Momentive

Momentive RTV162

1K alkoxy (neutral) RTV silicone, electronic grade

White neutral-cure silicone paste sealant, non-corrosive, for electronics and protecting connections. Primers SS4004/SS4044/SS4179 recommended on difficult substrates.

Momentive

Momentive RTV167

1K alkoxy (neutral) RTV silicone, high-strength electronic grade

High-strength grey neutral-cure silicone paste sealant, non-corrosive on Cu/brass, for electronics. Primers SS4004/SS4044/SS4179 on difficult substrates.

SnapSil

Momentive TN3005

1K alkoxy (neutral) RTV silicone, low volatility

Low-volatility neutral-cure silicone sealant for sealing electrical components, with primerless adhesion to many substrates.

SnapSil

Momentive TN3305

1K alkoxy (neutral) RTV silicone, low volatility, flowable

Fluid neutral-cure, low-volatile silicone sealant for sealing electronics, with primerless adhesion.

Momentive

Momentive RTV5242

1K alkoxy (neutral) RTV silicone, electronic grade

White neutral-cure electronic silicone (RTV5240 series) for sensitive metals, plastics and painted surfaces.

SilTrust

Momentive TSE3331K EX

2K addition-cure silicone, heat cure, thermally conductive

Black 1:1 two-component heat-curing silicone encapsulant, self-extinguishing and slightly thermally conductive, for electrical and motor potting.

Momentive

Momentive RTV655

Clear 2K addition-cure silicone, low viscosity

10:1 two-component potting silicone, a different formulation from RTV615, flexible down to −115 °C.

Momentive

Momentive RTV656

2K addition-cure silicone

10:1 two-component potting silicone, different from RTV615 and RTV655, with electrical/optical properties and bulk cure.

Novasil

Novasil S 800

1K neutral alkoxy silicone

Clear 1K silicone with good adhesion to glass and plastics and resistance to temperature and UV.

Novasil

Novasil S 651

2K alkoxy potting silicone

Fluid black two-component potting compound with UL 94 V-0 flame rating for electronics.

Novasil

Novasil S 803

1K alkoxy silicone, self-levelling, with UV indicator

Fluid silicone for thin-layer conformal coating of PCBs, with UV tracer for inspection.

Novasil

Novasil S 822

2K condensation potting silicone

Fast, soft, clear two-component potting compound for electronics.

Novasil

Novasil S 824

2K potting silicone, alkoxy condensation

Fluid, soft, black two-component potting compound, according to the electronics brochure.

Novasil

Novasil AS 830

RTV-2 addition-cure silicone gel (platinum)

Very fluid addition-cure silicone gel for protecting/encapsulating electronics.

Novasil

Novasil AS 832

RTV-2 addition-cure silicone gel (platinum)

Clear addition-cure silicone gel for electronics.

Novasil

Novasil AS 835

RTV-2 addition-cure silicone gel (platinum)

Higher-viscosity addition-cure silicone gel for electronics.

Hoenle Eleco

Vitralit UD 8060 F

1K modified acrylate-isocyanate, UV/visible cure with secondary moisture cure in shadow areas

UV-curing acrylate with secondary moisture cure for encapsulating components on boards.

Hoenle Eleco

Vitralit E-VBB-1 Gel

1K modified acrylate, UV/visible cure, optically clear

Optically clear, soft UV-cure encapsulation gel; an alternative to silicone.

Momentive

Momentive TSE3062

2K addition-cure silicone gel

2K silicone gel for encapsulating and protecting delicate electronics.

Momentive

Momentive RTV567

Low-outgassing 2K RTV silicone

Low-outgassing 2K silicone for optics, aerospace and sensitive electronics.

Structalit

Structalit 5891 T

1K epoxy, heat cure

Stable black frame material for frame & fill, applicable wet-on-wet and in several layers, with very high shock resistance.

Novasil

Novasil S 823

2K condensation potting silicone

White, low-viscosity two-component potting compound with slight thermal conductivity.

Vitralit

Vitralit UD 8050 LV

1K acrylate, UV/VIS + moisture cure

Low-viscosity conformal coating with a tack-free surface and moisture post-cure; flux-compatible.

Structalit

Structalit 5717

Epoxy, heat cure

Fill material for frame & fill in semiconductors, with very good flow, high Tg and no bleeding.

Structalit

Structalit 5720

1K epoxy, heat cure

High-Tg fill material for frame & fill, with very good flow and no bleeding.

Structalit

Structalit 5521

Epoxy, heat cure

Low-modulus flexible adhesive for connectors with excellent adhesion to LCP and PBT, suited to temperature-sensitive substrates (cures from 60 °C).

Structalit

Structalit 5531

Epoxy, heat cure

Low-CTE adhesive for connectors with excellent adhesion to LCP and PBT, resistant to chemicals and vibration, for temperature-sensitive substrates.

MG Chemicals

MG Chemicals 832B

2K potting epoxy

Low-permittivity two-component epoxy potting compound for charger receivers, controllers and wiring harnesses.

MG Chemicals

MG Chemicals 832C

2K potting epoxy

Low-permittivity two-component epoxy potting compound for receivers, controllers and wiring harnesses.

MG Chemicals

MG Chemicals 832WC

Optically clear 2K potting epoxy

Clear epoxy resin that cures rigid, submersible in water; allows visual inspection of components and protects LED domes against impact.

MG Chemicals

MG Chemicals 832HT

2K potting epoxy

Two-component epoxy potting compound from the 832 series.

MG Chemicals

MG Chemicals 834FX

Flexible flame-retardant 2K potting epoxy

Flame-retardant flexible epoxy encapsulant for aggressive thermal cycling.

MG Chemicals

MG Chemicals 8810

Potting polyurethane

Polyurethane potting resin with very good protection against water ingress and elasticity at very low temperature (family data).

MG Chemicals

MG Chemicals 419D

1K acrylic conformal coating

Economical, easily reworkable one-component acrylic coating with UV tracer for inspection.

MG Chemicals

MG Chemicals 419E

1K acrylic conformal coating

Reworkable one-component acrylic coating with IPC-CC-830C and UL746E certification.

MG Chemicals

MG Chemicals 4223F

1K polyurethane conformal coating

One-component polyurethane coating with strong protection against solvents and corrosive gases.

Kömmerling

Isamet R 8268

2K epoxy

High-viscosity pink epoxy with excellent chemical and weather resistance and electrical insulation; very good adhesion to metal.

Structalit

Structalit 5791

Epoxy, heat cure

Black frame material for frame & fill, resistant to vibration and impact and with low ionic content.

MG Chemicals

MG Chemicals 422C

1K silicone-modified acrylic conformal coating

Flexible, water-resistant acrylic-silicone coating with a wide temperature range.

MG Chemicals

MG Chemicals 4225

2K epoxy conformal coating

Flexible two-component epoxy coating with maximum chemical protection, suitable for ECUs exposed to salt, fuels and oils.

H.B. Fuller

H.B. Fuller EV Protect 4006 SFR

Espuma de poliuretano 2K ignífuga de baja densidad

Espuma encapsulante 2K ignífuga y ultraligera para el potting y encapsulado de celdas en módulos de baterías de VE; reduce la propagación térmica.

Certificaciones según documentación del fabricante, sujeto a confirmación.

Vitralit

Vitralit BL UC 1101

1K epoxy, UV cure, Black & Light technology

Thick-layer UV-curable black adhesive (Black & Light) for encapsulation, light shielding and lens bonding; low shrinkage.

Vitralit

Vitralit UH 1640

Acrylate/epoxy, UV + heat cure

Flexible, fast light-fixing, low-outgassing adhesive for bonding lenses with shadow areas (cameras/ADAS).

Vitralit

Vitralit E-1671 T

1K epoxy, UV + heat cure, thermally conductive

Thixotropic, thermally conductive UV/thermal epoxy for NTC glob top, frame in frame & fill, heat sink bonding and active alignment; low water absorption, low outgassing and low shrinkage.

Vitralit

Vitralit 1860

Acrylate, UV/VIS cure

Low-shrinkage flexible adhesive for active alignment and optoelectronics, impact resistant with a dry surface.

Vitralit

Vitralit UC 1870

1K epoxy, UV/VIS cure

Adhesive for active alignment and optoelectronics with low outgassing, low shrinkage and low CTE.

Vitralit

Vitralit E-4451 MV F

Acrylate, UV/VIS cure (+ heat according to the Automotive brochure), fluorescent

Soft elastic coating for flexible circuits (FPCB) and conformal coating, fast curing with a dry, tack-free surface.

Vitralit

Vitralit UV 2121

Acrylate, UV/VIS cure

Low-shrinkage, low-expansion UV adhesive for optoelectronics, hard dry surface, fast cure and moisture resistant.

Vitralit

Vitralit E-4731

Acrylate, UV/VIS cure

Flexible UV adhesive with a dry surface and excellent adhesion to glass and plastics, for medical devices (ISO 10993-5) and luxury packaging.

Vitralit

Vitralit E-4731 VT

Acrylate, UV/VIS cure

Dry-surface, flexible, tear-resistant UV adhesive with good resistance to moisture and thermal cycling, for edge bonding and glass/plastic bonding; CMR-free.

Vitralit

Vitralit UD 8057

UV/VIS + moisture cure

Adhesive for flexible electronics with high adhesion to various substrates, UV fixing and moisture post-cure in shadow areas.

Vitralit

Vitralit UD 5138

UV/VIS + heat cure, fluorescent

Fluorescent adhesive for flexible electronics with high adhesion to various substrates, UV fixing and thermal post-cure in shadow areas.

Hoenle Eleco

Vitralit UV E-2113

Highly filled 1K modified acrylate (glass 35 %), UV/visible cure

Highly filled, low-shrinkage UV acrylate for bonding and sealing plastics, glass and metal and protecting components.

Vitralit

Vitralit UD 8050 LV

1K acrylate, UV/VIS + moisture cure

Low-viscosity conformal coating with a tack-free surface and moisture post-cure; flux-compatible.

Vitralit

Vitralit BL UC 1102

1K epoxy, UV cure, Black & Light technology

Black & Light black adhesive for lens bonding and light blocking with defined optical density.

Vitralit

Vitralit UD 5134

Acrylate, UV/VIS + heat cure

Grey, flexible, low-shrinkage, low-CTE adhesive for bonding lenses/filters and dissimilar substrates, especially plastics; dry surface.

Vitralit

Vitralit 1528

Epoxy, UV + heat cure

High-Tg UV/thermal underfill with low transmission loss and excellent chemical resistance.

Vitralit

Vitralit 1650

Epoxy, UV cure

Flexible fill and coating material for small semiconductor chips, low ionic content and low water absorption; passes UL94 HB.

Elecolit

Elecolit 336

2K epoxy paste, room-temperature/heat cure

Conductive adhesive for medium-voltage protection/discharge and electronic contacting, with good conductivity when cured at room temperature.

MG Chemicals

MG Chemicals 841AR-P

Nickel-filled acrylic conductive pen

Nickel conductive pen for moderate-conductivity repairs such as PCB bridges and tracks.

Elecolit

Elecolit 3661

1K epoxy, heat cure

Stable, shape-retaining conductive adhesive for flexible circuits, flexible interconnect devices and die attach.

MG Chemicals

MG Chemicals 841ER

Nickel-filled solvent-based 2K epoxy paint

Nickel epoxy conductive coating with maximum durability and chemical resistance for outdoor and harsh environments.

MG Chemicals

MG Chemicals 842AR-P / 842AR-PS

Silver-filled acrylic conductive pen

Silver conductive pen for high-conductivity repairs such as signal tracks and through-holes.

MG Chemicals

MG Chemicals 842ARL

Silver-filled 1K acrylic paint

One-component silver acrylic variant for EMI/RFI shielding.

MG Chemicals

MG Chemicals 842ER

Silver-filled solvent-based 2K epoxy paint

Silver epoxy conductive coating with maximum durability, used for shielding interconnect cabling and radar and communications enclosures.

MG Chemicals

MG Chemicals 842UR

Silver-filled solvent-based 1K urethane paint

Flexible silver paint applicable in very thin layers, for package- and board-level shielding and for flexible substrates.

MG Chemicals

MG Chemicals 843ER

Solvent-based 2K epoxy paint with silver-coated copper

Silver-plated copper epoxy conductive coating for outdoor use and high durability.

MG Chemicals

MG Chemicals 843WBU

Water-based 1K paint with silver-coated copper

Aqueous silver-coated copper conductive paint for EMI/RFI shielding.

MG Chemicals

MG Chemicals 844AR

Dissipative 1K acrylic coating (ESD)

Durable coating that eliminates electrostatic discharge on a wide range of substrates; low VOC and HAP-free according to the manufacturer.

MG Chemicals

MG Chemicals 844WB

Water-based urethane ESD coating

Low-VOC water-based dissipative coating for production.

Elecolit

Elecolit 342

1K acrylate, room-temperature/heat cure

Small-particle conductive adhesive for ESD protection and contacting heating elements.

Novasil

Novasil S 152

2K potting silicone, alkoxy condensation

Fluid, white, thermally conductive two-component potting compound with V-0 flame rating according to the brochure.

MG Chemicals

MG Chemicals 8329TCM

2K thermally conductive epoxy paste

Thixotropic thermally conductive epoxy paste adhesive, suitable for vertical surfaces.

MG Chemicals

MG Chemicals 8618

Silicone-free thermal paste

Very high conductivity silicone-free thermal paste.

Tonsan / Bacon (H.B. Fuller Aerospace)

Tonsan 1587

Silicone for electronics (aerospace electronics)

Tonsan/Bacon silicone: replaces preformed gaskets, high T°.

Tonsan / Bacon (H.B. Fuller Aerospace)

Tonsan 2530

Silicone for electronics (aerospace electronics)

Tonsan/Bacon silicone: electronic glass/plastic/metal bonding.

Tonsan / Bacon (H.B. Fuller Aerospace)

Tonsan 2532

Silicone for electronics (aerospace electronics)

Tonsan/Bacon silicone: 0,8 W/mK, electronic TIM.

Tonsan / Bacon (H.B. Fuller Aerospace)

Tonsan 2534 / 2536

Silicone for electronics (aerospace electronics)

Tonsan/Bacon silicone: seam sealing, general assembly.

Tonsan / Bacon (H.B. Fuller Aerospace)

Tonsan 1527 / 1527B / 1527T

Silicone for electronics (aerospace electronics)

Tonsan/Bacon silicone: reworkable applications, neutral, low/no odor.

Vitralit

Vitralit E-5140

Acrylate, UV/VIS cure

Soft, flexible adhesive with dry-surface cure and excellent thermal-cycling resistance, for tubing sets, breathing circuits or coating electronic devices; ISO 10993-5.

MG Chemicals

MG Chemicals 8349TFM

2K thermally conductive epoxy, flame-retardant

Fast-curing fluid thermally conductive epoxy adhesive for thermal management of processors and battery modules; meets UL94 V-0 per MG testing.

MG Chemicals

MG Chemicals 8329HTC

2K thermally conductive epoxy

Thermally conductive epoxy adhesive with a wide temperature range.

MG Chemicals

MG Chemicals TimCool 1.4

MG Chemicals

MG Chemicals TimCool 2.5

MG Chemicals

MG Chemicals 8617A

Silicone-free thermal paste

High-conductivity silicone-free thermal paste, also proposed as a gap filler in batteries.

MG Chemicals

MG Chemicals 4226A

Clear 1K insulating varnish (acrylic, modified alkyd)

Clear insulating varnish with high dielectric strength for coils, windings and PCBs; low VOC and HAP-free.

MG Chemicals

MG Chemicals 4228

1K dielectric coating (acrylic, modified alkyd)

Dielectric coating for high-voltage insulation with class H insulation up to 180 °C per UL EIS.

MG Chemicals

MG Chemicals 4228A

Red 1K insulating varnish (acrylic, modified alkyd)

Red insulating varnish with high dielectric strength, liquid and aerosol; low VOC and HAP-free.

SnapSil

Momentive RTV103

1K acetoxy RTV silicone, moisture cure

One-component acetoxy RTV silicone from the RTV100 series, black, paste. Primerless adhesion to metals, glass, ceramics, silicone rubber and some rigid plastics; primers SS4004/SS4044/SS4179 for difficult substrates.

SnapSil

Momentive FRV1106

1K acetoxy fluorosilicone, moisture cure

Red fluorosilicone paste resistant to fuels and hydrocarbon solvents, for tank seals and sensors. Primerless adhesion to many substrates.

SnapSil

Momentive TN8000

1K alkoxy (neutral) RTV silicone, moisture cure

Neutral-cure silicone adhesive-sealant for sealing and fixing in electronics, with primerless adhesion to metals, copper, plastics and glass and slight thermal conductivity.

Momentive

Momentive IS5128E

1K neutral RTV silicone, moisture cure

Translucent silicone paste sealant for electronics and high-performance plastics, with primerless adhesion to polycarbonate and non-corrosive on copper.

Momentive

Momentive TSE392

1K alkoxy RTV silicone, moisture cure, thixotropic

Thixotropic neutral-cure silicone, non-corrosive to metals, for electrical/electronic insulation and moisture protection; primerless adhesion to many plastics.

Momentive

Momentive TSE397

1K alkoxy RTV silicone, moisture cure, semi-flowable

Semi-fluid, non-corrosive neutral-cure silicone for electrical/electronic insulation and moisture protection.

Momentive

Momentive TSE399

1K alkoxy RTV silicone, moisture cure, flowable

Fluid, non-corrosive neutral-cure silicone for electrical/electronic insulation and thin-layer moisture protection.

Momentive

Momentive TSE3280G

1K thermally conductive silicone, heat cure

Heat-curing grey thermally conductive silicone adhesive for heat dissipation in electronics.

Momentive

Momentive TSE3281G

1K thermally conductive silicone, heat cure

Grey thermally conductive silicone adhesive with higher conductivity and hardness for thermal interfaces in electronics.

Silopren

Silopren Gel 6209

2K addition-cure silicone gel, clear

Solvent-free 1:1 clear silicone gel for potting modules, cable joints and electronics; room-temperature or heat-accelerated cure.

Momentive

Momentive RTV6136

Silicone dielectric gel (RTV6100 series)

Dielectric gel cited in the master file for protecting delicate electronics in harsh environments and damping shock and vibration.

Momentive

Momentive RTV6196

Silicone dielectric gel (RTV6100 series)

Dielectric gel cited in the master file for protecting delicate electronics in harsh environments and damping shock and vibration.

Momentive

Momentive RTV31

2K condensation RTV silicone, high temperature

Fluid red high-temperature silicone elastomer for potting motors and transformers; requires primer to adhere to non-silicone surfaces.

SilTrust

Momentive RTV8111

2K condensation RTV silicone

White two-component silicone for electrical and aerospace potting; primer SS4004P on non-silicone surfaces.

SilTrust

Momentive RTV8112

2K condensation RTV silicone

White two-component silicone for electronic/aerospace potting; primer SS4004P on non-silicone surfaces.

Momentive

Momentive RTV210

2K alkoxy RTV silicone, fast cure, thixotropic

Thixotropic two-component silicone system with fast room-temperature cure (RTV210A + hardener RTV224B black or RTV229B grey), for automotive headlamps, solar panels and electronics.

SilTrust

Momentive ECC3050S

1K solvent-free silicone conformal coating

Clear silicone conformal coating for PCBs, fast-curing at room temperature or in a low-temperature oven.

Novasil

Novasil S 15

1K silicone, modified amine-oxime system, MEKO-free, self-levelling

Very soft self-levelling one-component silicone designed for potting and filling electronic and lighting components.

Novasil

Novasil S 802

1K neutral alkoxy silicone

Soft silicone for elastic bonding and sealing of acrylic and polycarbonate, also in electronics.

Novasil

Novasil S-SP 6270

1K neutral silicone, self-levelling

Self-levelling neutral silicone with electrical insulation properties.

OTTOSEAL

OTTOSEAL S 68

1K neutral silicone

Neutral silicone for electronic/pharmaceutical production cleanrooms and ventilation.

MG Chemicals

MG Chemicals serie 832

Epoxy potting resins for protecting electronics; the technician picks the reference for each case.

Viamonte will tell you the exact 832 series reference for your application.

MG Chemicals

MG Chemicals 8310A

Gel stripper for conformal coating

Gel stripper for local removal of conformal coating and some adhesives.

Kömmerling

Körapop 225/2K

MS/STP with booster system (Köracur), weather-independent cure

Körapop 225 processed with booster for large gap filling and fast cure; also cures as 1K; EC1+.