UV-cure bonding

Hoenle Eleco

Vitralit 7044 VLV

1K modified acrylate, solvent-free, UV/visible light cure

UV and visible-light curing acrylate, flexible and with high peel strength, for PC, PMMA, PVC, glass and stainless steel.

Hoenle Eleco

Vitralit UV E-2113

Highly filled 1K modified acrylate (glass 35 %), UV/visible cure

Highly filled, low-shrinkage UV acrylate for bonding and sealing plastics, glass and metal and protecting components.

Hoenle Eleco

Vitralit 6128

1K modified acrylate, UV cure with heat or chemical post-cure (activator)

UV acrylate with secondary heat or activator cure for areas the light cannot reach.

Hoenle Eleco

Vitralit UD 8060 F

1K modified acrylate-isocyanate, UV/visible cure with secondary moisture cure in shadow areas

UV-curing acrylate with secondary moisture cure for encapsulating components on boards.

Use: Dual UV and moisture cure

Hoenle Eleco

Vitralit E-VBB-1 Gel

1K modified acrylate, UV/visible cure, optically clear

Optically clear, soft UV-cure encapsulation gel; an alternative to silicone.

Use: Flexible UV glass/plastic bonding

Vitralit

Vitralit CIPG 60200

Blue fluorescent 1K polyacrylate, UV/LED-UV cure; cured-in-place gasket (CIPG)

Cured-in-place liquid gasket for automotive electronics housings (ECU, BDU, OBC…), with low compression set, resistance to engine oil, ATF and brake fluid, and reusable after disassembly (MRO). Replaces solid gaskets and RTV silicone FIPG.

Use: UV cured-in-place gasket

Vitralit

Vitralit UV E-2115

1K acrylate, UV/VIS cure

Highly thixotropic UV adhesive for cell block spacers in batteries and SMD protection; hard, dry surface, low shrinkage and good adhesion to FR4.

Use: UV-cure bonding

Vitralit

Vitralit UD 4292 F

1K acrylate, UV/VIS + anaerobic cure

Capillary-flow adhesive with UV cure and anaerobic post-cure, suited to electric motor bearings.

Use: UV-cure bonding

Vitralit

Vitralit UD 8050

1K acrylate-isocyanate, UV/VIS + moisture cure

UV adhesive/glob top with moisture post-cure, jettable, for encapsulating welds in cell contacting systems and glob tops; flux-compatible and low in halogens.

Use: UV-cure bonding

Vitralit

Vitralit UD 8055

1K acrylate, UV/VIS + moisture cure

High-Tg adhesive with deep cure and moisture post-cure for batteries and connector bonding; flux-compatible and low ionic content.

Use: UV-cure bonding

Vitralit

Vitralit UD 8056

1K acrylate, UV/VIS + moisture cure

Connector bonding adhesive that passes UL94 HB, high Tg, fast cure, flux-compatible and low ionic content.

Use: UV-cure bonding

Vitralit

Vitralit E-VBB-1

1K acrylate, UV/VIS cure

Very flexible, stress-compensating UV adhesive for sealing connectors and bonding lenses/filters and glass/plastic; optically clear.

Use: UV-cure bonding

Vitralit

Vitralit BL UC 1101

1K epoxy, UV cure, Black & Light technology

Thick-layer UV-curable black adhesive (Black & Light) for encapsulation, light shielding and lens bonding; low shrinkage.

Use: UV-cure bonding

Vitralit

Vitralit BL UC 1102

1K epoxy, UV cure, Black & Light technology

Black & Light black adhesive for lens bonding and light blocking with defined optical density.

Use: UV-cure bonding

Vitralit

Vitralit BL UC 1103

1K epoxy, UV cure (UV/VIS in the Optical brochure), Black & Light technology

Black & Light black adhesive with high optical density for lens bonding, light blocking and custom transmission.

Use: UV-cure bonding

Vitralit

Vitralit UD 6574

1K epoxy, UV + heat cure

Light-blocking, impact-resistant protective-layer adhesive for lens bonding and custom transmission.

Use: UV-cure bonding

Vitralit

Vitralit UC 6020-1 LV

1K epoxy, UV cure

Clear UV resin with high impact and temperature resistance for micro/nano imprinting, wafer bonding and light carpets.

Use: UV wafer bonding

Vitralit

Vitralit UH 1640

Acrylate/epoxy, UV + heat cure

Flexible, fast light-fixing, low-outgassing adhesive for bonding lenses with shadow areas (cameras/ADAS).

Use: UV-cure bonding

Vitralit

Vitralit E-1671 T

1K epoxy, UV + heat cure, thermally conductive

Thixotropic, thermally conductive UV/thermal epoxy for NTC glob top, frame in frame & fill, heat sink bonding and active alignment; low water absorption, low outgassing and low shrinkage.

Use: UV/thermal active alignment

Vitralit

Vitralit E-1672

1K epoxy, UV + heat cure

Adhesive for active alignment with shadow areas, low outgassing, low shrinkage and low CTE.

Use: UV-cure bonding

Vitralit

Vitralit 1860

Acrylate, UV/VIS cure

Low-shrinkage flexible adhesive for active alignment and optoelectronics, impact resistant with a dry surface.

Use: UV-cure bonding

Vitralit

Vitralit UC 1870

1K epoxy, UV/VIS cure

Adhesive for active alignment and optoelectronics with low outgassing, low shrinkage and low CTE.

Use: UV-cure bonding

Vitralit

Vitralit UD 5134

Acrylate, UV/VIS + heat cure

Grey, flexible, low-shrinkage, low-CTE adhesive for bonding lenses/filters and dissimilar substrates, especially plastics; dry surface.

Use: UV-cure bonding

Vitralit

Vitralit CIPG 60201

Acrylate, UV/VIS cure; cured-in-place gasket (CIPG)

Flexible UV liquid gasket for housings with low compression set, with improved reliability against automotive fluids compared with CIPG 60200.

Use: UV cured-in-place gasket

Vitralit

Vitralit 5140 VT

Acrylate, UV/VIS cure

Flexible UV gasket/sealing material with high resistance to climatic changes and moisture.

Use: UV sealing

Vitralit

Vitralit 1655

1K epoxy, UV + heat cure

Flexible, low-viscosity optical adhesive/potting, resistant to moisture and sterilisation, with excellent adhesion to plastics and metals; USP Class VI and ISO 10993-5.

Use: UV-cure bonding

Vitralit

Vitralit UD 8051

Acrylate, UV/VIS + moisture cure

Dual-cure black adhesive for edge sealing of control elements (interior design).

Use: UV + moisture edge sealing

Vitralit

Vitralit 6104 VT

Filled acrylate, UV + heat cure

Stable filled adhesive for staking capacitors and large components, with high adhesion to metals and sintered substrates.

Use: UV-cure bonding

Vitralit

Vitralit UV 2121

Acrylate, UV/VIS cure

Low-shrinkage, low-expansion UV adhesive for optoelectronics, hard dry surface, fast cure and moisture resistant.

Use: UV-cure bonding

Vitralit

Vitralit 1702

Acrylate, UV cure

Very low viscosity, high-modulus capillary medical adhesive with low oxygen inhibition for tubing connections, check valves and blood filters; USP Class VI.

Use: UV bonding of medical devices

Vitralit

Vitralit 1703

Acrylate, UV/VIS cure

Thixotropic gap-filling medical adhesive, high modulus and stable shape, for tubing connections, valves and blood filters; USP Class VI.

Use: UV bonding of medical devices

Vitralit

Vitralit E-4731

Acrylate, UV/VIS cure

Flexible UV adhesive with a dry surface and excellent adhesion to glass and plastics, for medical devices (ISO 10993-5) and luxury packaging.

Use: UV glass/plastic bonding

Vitralit

Vitralit E-4731 VT

Acrylate, UV/VIS cure

Dry-surface, flexible, tear-resistant UV adhesive with good resistance to moisture and thermal cycling, for edge bonding and glass/plastic bonding; CMR-free.

Use: UV-cure bonding

Vitralit

Vitralit E-5140

Acrylate, UV/VIS cure

Soft, flexible adhesive with dry-surface cure and excellent thermal-cycling resistance, for tubing sets, breathing circuits or coating electronic devices; ISO 10993-5.

Use: UV bonding of medical devices

Vitralit

Vitralit E-7041

Acrylate, UV/VIS cure

Capillary-flow medical adhesive with very good adhesion to plastics for bonding needles, connectors/tubes/housings or dialysis filters; fluorescent markers for in-line inspection; ISO 10993-5.

Use: UV bonding of medical devices

Vitralit

Vitralit E-7090 VHS F

Acrylate, UV/VIS cure, fluorescent

Capillary medical adhesive with very high adhesion to plastics and very fast cure at low intensity, for sealing hollow-fibre filters, needles and endoscopes; ISO 10993-5.

Use: UV bonding of medical devices

Vitralit

Vitralit E-7311

Acrylate, UV/VIS cure

High-strength medical adhesive for tubing sets, connectors and housings, with very good adhesion to plastics; available with orange fluorescence (FO); ISO 10993-5.

Use: UV bonding of medical devices

Vitralit

Vitralit UD 6572

Epoxy-acrylate, UV/VIS + heat cure

Black adhesive for bonding endoscopes/lenses and protecting sensitive parts, with UV pre-fixing and required secondary heat cure; ISO 10993-5.

Use: UV-cure bonding

Vitralit

Vitralit UV E-4050

Acrylate, UV/VIS cure

Impact-resistant medical adhesive formulated for needle bonding, with very good adhesion to plastics, glass and metal; ISO 10993-5.

Use: UV bonding of needles

Vitralit

Vitralit UV E-7030

Acrylate, UV/VIS cure

High-elongation flexible adhesive for low surface energy plastics, with a dry surface after UV cure; ISO 10993-5.

Use: UV bonding of low-energy plastics

Vitralit

Vitralit UV E-2114 (HF)

Acrylate, UV/VIS cure

UV adhesive for bonding and sealing plastic, glass and metal with very good adhesion to FR4 and low shrinkage.

Use: UV bonding/sealing of plastic, glass and metal

Vitralit

Vitralit UD 8057

UV/VIS + moisture cure

Adhesive for flexible electronics with high adhesion to various substrates, UV fixing and moisture post-cure in shadow areas.

Use: UV bonding on flex PCB

Vitralit

Vitralit UD 5138

UV/VIS + heat cure, fluorescent

Fluorescent adhesive for flexible electronics with high adhesion to various substrates, UV fixing and thermal post-cure in shadow areas.

Use: UV bonding on flex PCB

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3075

1K modified acrylate, UV cure

Low-viscosity UV adhesive for plastic and glass/metal.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3150

1K modified acrylate, UV cure

Flexible UV adhesive for plastic, glass and glass-to-metal.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3200

1K modified acrylate, UV cure

UV adhesive for plastic, glass and glass/metal with a tack-free surface.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3300

1K modified acrylate, UV cure

Thixotropic UV adhesive for plastic, glass and glass-to-metal with a tack-free surface.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3307

1K modified acrylate, UV cure

Blue-coloured thixotropic UV adhesive (visual control).

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3381

1K modified acrylate, UV cure

Thixotropic UV adhesive for plastics and glass/metal.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3600

1K modified acrylate, UV cure

Multi-purpose thixotropic UV adhesive.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3610

1K modified acrylate, UV cure

Fluorescent thixotropic UV adhesive for quality control under UV light.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 3631

1K modified acrylate, UV cure

Flexible, fluorescent UV gel.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 305

1K modified acrylate, UV cure

Medical-grade UV adhesive (ISO 10993-5) for plastic-to-plastic and plastic-to-metal.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

U 314

1K modified acrylate, UV cure

High-viscosity medical-grade UV adhesive for needle bonding on plastics, glass and metals.

Use: UV-cure bonding

H.B. Fuller (UV; TDS legacy Cyberbond)

MU 320

1K modified acrylate, UV cure

Medical-grade thixotropic UV adhesive for plastic, glass and glass-to-metal.

Use: UV-cure bonding

Cyberbond / Cyberlite (legacy)

Cyberbond U3345

1K modified acrylate, UV cure

UV adhesive for glass-to-glass and glass-to-metal (historical TDS 2013).

Use: UV-cure bonding

Cyberbond / Cyberlite (legacy)

Cyberlite U340

1K modified acrylate, UV cure

Modified acrylate UV adhesive for plastics (PC, PMMA), glass and ceramics (US TDS 2012).

Use: UV-cure bonding

Cyberbond / Cyberlite (legacy)

Cyberlite U331

1K modified acrylate, UV cure

Modified acrylate UV adhesive for glass, metals and ceramics (US TDS).

Use: UV-cure bonding

Cyberbond / Cyberlite (legacy)

Cyberlite U333

1K modified acrylate, UV cure

High-viscosity, flexible UV adhesive for plastics, especially polycarbonate.

Use: UV-cure bonding

Cyberbond / Cyberlite (legacy)

Cyberlite U301

1K modified acrylate, UV cure

Low-viscosity UV adhesive for glass/metal, for capillary use.

Use: UV-cure bonding

Cyberbond / Cyberlite (legacy)

Cyberbond U306

1K modified acrylate, UV cure

Thixotropic UV adhesive for glass, with declared ISO 10993-5 test.

Use: UV-cure bonding

Cyberbond / Cyberlite (legacy)

Cyberbond LPU829

1K modified acrylate, UV cure

Very low viscosity capillary UV adhesive for glass (provisional TDS).

Use: UV-cure bonding

InvisiSil

Momentive OP2131SD

1K UV-curable optical silicone

Clear UV-cure optical silicone for optical bonding of displays and touch panels, very soft and low haze.

Use: UV-cure bonding