2K methacrylates (MMA)

Vibra-TITE

Vibra-TITE AL 6070 Low Odour

Low-odour 2K 1:1 methacrylate

Clear, low-odour structural methacrylate for metals, plastics and composites.

Vibra-TITE

Vibra-TITE AT 1740 PP/PE

2K 10:1 methacrylate for polyolefins

Structural bonding of PE and PP without pretreatment.

On PE and PP, always run a preliminary test on your part: depending on the material, it may need pretreatment.

Plexus

Plexus MA8110

2K MMA, 1:1 mix

High-toughness, low-odour 1:1 methacrylate; bonds unprimed metals, composites and plastics.

Plexus

Plexus MA8105 GB

2K MMA, 1:1 mix

Fast-curing 1:1 methacrylate for galvanised steel, coated metal and difficult plastics.

Plexus

Plexus MA830

2K MMA, 10:1 mix

Fast-curing 10:1 methacrylate that bonds aluminium without primer.

Plexus

Plexus MA560-1

2K MMA, 1:1 mix

Very long open time 1:1 methacrylate for large composite joints (FRP, gelcoat).

Plexus

Plexus MA420

2K MMA, 10:1 mix

Fast-curing 10:1 methacrylate; Plexus's preferred option for bonding EPDM.

Plexus

Plexus MA3940LH

2K MMA, 10:1 mix

Very fast-curing 10:1 methacrylate for stress-crack-sensitive plastics such as polycarbonate or acrylic.

Cyberbond (legacy)

Cyberbond AL 6026

Modified acrylate / 2K methacrylate

Very fast-curing 2K 1:1 MMA (A pink / B light green) for plastics and metals.

Cyberbond (legacy)

Cyberbond AL 6080

Modified acrylate / 2K methacrylate

Very fast-curing 2K 1:1 MMA (A clear / B blue), high elongation.

Cyberbond (legacy)

Cyberbond AT 1727

Modified acrylate / 2K methacrylate

White long pot life 2K 1:1 MMA for polycarbonate and metals.

H.B. Fuller

MP55300

2K 1:1 structural methacrylate

1:1 structural MMA for metals, composites and thermoplastics (US data sheet).

Plexus

Plexus MA300

2K MMA, 1:1 mix

High-strength, low-viscosity, injectable two-component 1:1 methacrylate for small parts and repairs; on aluminium and stainless steel it requires PC120 conditioner.

Plexus

Plexus MA310

2K MMA, 1:1 mix

High-strength, high-stiffness 1:1 methacrylate with longer working time than MA300; injectable for repairs, on metals with PC120.

Plexus

Plexus MA320

2K MMA, 10:1 mix

Low-modulus, high-toughness 10:1 methacrylate, even at low temperatures; suited to bonding composites in transport, marine, wind energy and civil engineering.

Plexus

Plexus MA420FS

2K MMA, 10:1 mix

Variant of the MA420 family with its own TDS (in English) and mechanical values different from MA420; 10:1 methacrylate for structural thin-joint bonding (max. gap 4 mm).

Plexus

Plexus MA420W

2K MMA, 10:1 mix

UV-stable white variant of MA420, cited on the official website with its own value sheet.

Plexus

Plexus MA422

2K MMA, 10:1 mix

High-toughness 10:1 methacrylate with medium open time, used for bonding composites in marine and transport with minimal preparation; in rail, medium-sized FRP interior parts.

Plexus

Plexus MA425

2K MMA, 10:1 mix

10:1 methacrylate with long working time, widely used for bonding composites in marine and transport with hardly any preparation; rub rails, swim platforms and bus side panels.

Plexus

Plexus MA530

2K MMA, 1:1 mix

Highly thixotropic, tough, low-exotherm 1:1 methacrylate with moderate open time, for composites and metals in small and large structures; medium repairs.

Plexus

Plexus MA550

2K MMA, 10:1 mix

Long working time 10:1 methacrylate; the selector describes it as UV-stable white. Old TDS (2018).

Plexus

Plexus MA590

2K MMA, 1:1 mix

Ultra-long working time, very low exotherm 1:1 methacrylate for large marine structures: stringers and skins with thick bond lines.

Plexus

Plexus MA832

2K MMA, 10:1 mix

Primerless 10:1 methacrylate on aluminium, medium working time and good vibration and noise reduction; rail use.

Plexus

Plexus MA920

2K MMA, 10:1 mix

Low-odour, high-toughness 10:1 methacrylate cited in the Selector Guide.

Plexus

Plexus MA1020

2K MMA, 10:1 mix

Low-odour, low-shrinkage 10:1 methacrylate cited in the Selector Guide.

Plexus

Plexus MA1025

2K MMA, 10:1 mix

Low-odour, very low shrinkage 10:1 methacrylate designed for thin sheet (stainless < 1 mm) while keeping flatness; rail skirting.

Plexus

Plexus MA3940

2K MMA, 10:1 mix

10:1 methacrylate for crazing-sensitive plastics; a slower version of MA3940LH.

Plexus

Plexus MA8120 / MA8120GB

2K MMA, 1:1 mix

Low-halogen 1:1 methacrylate, direct to metal, with medium-to-long working time and higher elongation; bonds galvanised and zinc-treated steels. GB with glass beads.