MomentiveMould-making silicones
Momentive TSE3478T
2K addition-cure mould-making silicone
Two-component addition-cure silicone for industrial moulds, with C/D/E/F hardeners to adjust pot life.
Technical data
| Mix ratio | Base + endurecedor C/D/E/F al 10 % en peso |
|---|---|
| Base viscosity | 50 Pa·s |
| Pot life | 1–4 h depending on the hardener |
| Demoulding | 24–72 h a 23 °C |
| Hardness | Shore A 40–45 |
| Tensile strength | 6 MPa |
| Elongation | 380 % |
| Tear strength | 32–35 N/mm |
Recommended for: by technology only
Need the technical data sheet (TDS) and safety data sheet (SDS)?
Send us your enquiry and we will send you the latest versions, together with a technical expert's recommendation.
Send us your enquiry and we will send you the latest versions, together with a technical expert's recommendation.